5W Isolation AC/DC Converters 24Vout TP05AS220S24W

Universal input voltage range	Both for AC and DC input voltage	Wide input voltage2:1 and 4:1

Fixed switching frequency	Overheat protection	Over current protection

Short circuit protection	RoHS compliant	Operating temperature -40C to 70C

SELECTION GUIDE

Part Number	Input Voltage	Output	Efficiency (Typ. )

%	Recommend output external capacitor

Rated	Range values	VoltageVDC)	Current

A		C1C2C3	C4	C5C6

The TPJ-2W series are miniature, 6KVDC isolated 2W DC-DC converters in a SIP package with single and dual output voltage. They offer the ideal solution in many space critical applications for board level power distribution. The internal SMD construction makes it possible to offer a product with high performance at low cost. The series offers smaller size, improved efficiency, lower output ripple noise.

RoHS compliant	Single and dual outputs	UL 94V-0 package material

Operating temperature: -40C to 85C	Footprint 1.91cm2	SIP package style

No heatsink required	6KVDC isolation	Custom solutions available

Input voltage: 3.3V, 5V ,12V	Output voltage: 3.3V, 5V, 9V, 12V ,15V / ±5V, ±9V, ±12V ,±15V	/

SELECTION GUIDE

Part Number	Nominal Input Voltage	Output Voltage	Output Current	Efficiency (Min.)

V	V	mA	%

TPJ0505S-2W	5	±5	±200	73

20W 4KVAC Isolation Wide Input AC/DC Converters
The rated output power of TP20AC series is 20W,With very low no-load consumption (only 60mW),
Low leakage current(only 0.1mA ),ultra-small size,50.8*25.4*15.5mm,isolated voltage up to 4KVAC.
Product safe and reliable,Good EMC performance,EMC And meet the safety specifications of IEC/EN61000-4,
CISPR22/EN55022,UL60950/EN60950 /EN60601,etc.Widely used in medical, industrial, office and civil industries,
if applied to the bad electromagnetic compatibility must refer to the application circuit

Part Number	Input	Output	Efficiency


(typ.)

%

VoltageVAC)	Voltage VDC)	CurrentA
 Show full text

TP2L-2W series are a range of isolated 2 Watt converters in a SIP package, 2:1 wide input range and tightly regulated output voltage qualifies these converters for many cost critical applications in industrial and consumer electronics. Operating temperature range from -40 C to 85 C .
Part Number Input Output Efficiency (Typ.)

Voltage(VDC)	Voltage

(VDC)	Current(mA)

Rated	Range values	Max*	VDC	Max.	Min.	%

TP2L05D05S-2W	5 (2:1)	4.5-9	11	±5	±200	±20	67

TP2L05D09S-2W	5 (2:1)	4.5-9	11	±9	±111	±11	71

TP2L05D12S-2W	5 (2:1)	4.5-9	11	±12	±83	±8	72

TP2L05D15S-2W	5 (2:1)	4.5-9	11	±15	±67	±7	73

TP2L05D24S-2W	5 (2:1)	4.5-9	11	±24	±42	±4	72

The rated output power of TP03DB converters is 3W,the outline dimensions is"25.4*25.4*11.2", 2:1 and 4:1 wide input voltage range,the voltage range is 9V-18V,18V-36V,36V-72V,9V-36V and 18V-72VDC.The accuracy of the converter can reach ±1%,it can be widely used in elecommunications,railway transportation, instrument and etc.

3W output voltage	2:1 and 4:1 wide input voltage range
Over load protection

25.4mm*25.4mm*11.2mm standard package

Fixed switching frequency

Over voltage Protection

Metal shell package

RoHS compliant

Operating temperature -25 to 55

TP78LXX-1 series switching regulators are ideal replacement for TP78xx linear regulators and LDOs.
The efficiency of up to 97% means that very little energy is wasted as heat
so there is no need for any heat sinks with their additional space and mounting costs.
They are widely used in industrial control, instrumentation, and electric power applications.
Convertisseur DC/DC abaisseur

ROHS Compliant	Wide input non-isolatedregulated single output  	Efficiency up to 97%

Short circuit protection, Thermal shutdown	Temperature range: -40C ~ +85C	Low ripple noise

SIP package	No heat sink required	Industry standard pinout

Part Number	Input Voltage (VDC)	Output	Efficiency%

The rated output power of TP01(02)AZ series is 1W,2W with wide input voltage range, for both AC input and DC input application. High reliability, Low power consumption, low leakage current 0.1mA, High isolation.Product safe and reliable,Good EMC performance,EMC And meet the safety specifications of IEC/EN61000-4CISPR22/EN55022UL62368/EN662368/IEC62368. Widely used in industrial control and electrical instrumentation, smart home, which do not have high requirement on EMC.
The EMC external circuit must be added if the products need to be applied to EMC harsh environment.

Part Number	Input Voltage	Output	Efficiency


Ripple (mv)

VAC	    VDC	VoltageVDC)	CurrentmA

TP01AZ220S03W	85-305	80-400	3.3	300	62	150

TP01AZ220 S05W	85-305	80-400	5	200	68	150

TP01AZ220S09W	85-305	80-400	9	111	70	150

TP01A Z220S12W	85-305	80-400	12	83	71	150

TP01AZ220S15W	85-305	80-400	15	67	71	150

Part Number Nominal Input Voltage Output
Voltage 1 Output
Voltage 2 Output
Current 1
V V V mA
TPD050503D-W5 5 5 3.3 50
TPD050505D-W5 5 5 5 50
TPD050509D-W5 5 5 9 50
TPD050512D-W5 5 5 12 50
TPD050515D-W5 5 5 15 50

5W 3KVAC Isolation Wide Input AC/DC Converters
TP05AL series is an economical open frame AC/DC switching power supply,The rated output power is 5W
with wide input voltage range, for both AC input and DC input application. High reliability, Low power consumption, safety isolation .Widely used in industrial control and electrical instrumentation, smart home,etc.

Universal input voltage range	Both for AC and DC input voltage	Low Ripple &Noise

High efficiency, high power density, miniature dimensions	Low power consumption50mW

Overheat protection ,Over current protection

International standard Footprint&Pinouts	Industrial product  design	Operating temperature : -40 to 70

SELECTION GUIDE

Part Number	Input Voltage	Output	Efficiency (Typ. )%	Ripple &Noise mVp-p ( Typ.)
Voltage VAC)	VoltagVDC)	CurrentA
 Show full text

The rated output power of TPC/PDF-1200-XS series is1200Winput voltage range90-264VAC, output voltage:24V,36V,48V,High reliability, precision,effificency , ultra-small size, no external heat sink required, stable output voltage and etc, with over current protection,short circuit,overloadprotection, Widely used in telecommunications, industrial control, instrument, data acquisition, signal control , New Energy, Security,and other electronic systems.

AC input 90VAC-264VAC	short circuit, overload,over-voltage protection	Operating temperature-25~50

RoHS complaint	High reliability,effificency,100% full load burn-in test	Built-in active PFC function, PF>0.96

capacitors

Build in DC OK signal

Using ZVS technology to reduce power dissipation

Built in AC inrush current limiting circuit(<20A)

TPL0505S 2W SIP DC/DC converters 5Vin 5Vout

Part Number	Nominal Input Voltage	Output Voltage	Output Current(Max/Min)	Efficiency

V	V	mA	%

TPL0503S	5	3.3	400/40

80

TPL0505S	5	5	400/40

77

TPL0509S	5	9	221/22.1

80

TP L0512S	5	12	168/16.8

0.25W 3KVDC Isolated Dual Output SMD DC/DC Converters

Miniature surface mounted DC/DC Converters are an ideal and economical solution for many applications where noise reduction, voltage isolation, voltage conversion in distributed power systems is required. these converters are qualified for the higher temperatures requested by lead-free reflow solder processes, especially for automated SMD production lines.

Part Number Nominal Input Voltage Output Voltage

V	V

TPAT0303-W2	3.3	±3.3

TPAT0305-W2	3.3	±5

TPAT 0309-W2	3.3	±9

TPAT0312-W2	3.3	±12

15W 2.5KV isolated 100-1000VDC super wide input voltage DC/DC converters

The rated output power of TP15DU converters is 15W ,it is 100-1000VDC super wide input voltage rangeHigh Efficiency ,High reliability DC/DC switch power supplycan be widely used in photovoltaic power generation and high frequency inverter and other occasionsprovide a stable working voltage for the load equipments, And its built-in multiple protection function can improve the module power supply & Load safety performance under abnormal circumstances .

Part Number	Input Voltage	Output
Voltage VDC)	CurrentA	Current

A

Rated 	Range values

TP15DU600S05	600	100-1000	5	3

TP15DU600S12	600	100-1000	12.1	1.25

TP15DU600S15	600	100-1000	15	1

TP15DU600S24	600	100-1000	24	0.625

TP15DU 600D12	600	100-1000	±12	±0.625

TP15DU600D15	600	100-1000	±15	±0.5

25-50W DIP regulated 1.5KVDC isolated DC-DC converters
case size:50.8X50.8X13.3mm


we,TOPPOWER main products:
0.1W-400W DC-DC converters,1W-30W AC-DC converters,(SIP/DIP/SMD)
TOPPOWER quality : ISO9001:2015, IATF16949:2016
welcome inquiry.

The rated output power of TPC/PD-15-XS series is 15Winput voltage range90-264VAC,
output voltage : 3.3V,5V,12V,15V ,24V. High reliability, precision,effificency , ultra-small size,
with short circuit, over-load,over-voltage protection,Widely used in telecommunications,
industrial control, instrument,data acquisition,signal control , New Energy,
Security,and other electronic systems.

AC input 90VAC-264VAC	100% full load burn-in test	 short circuit, overload,over-voltage protection

Operating temperature-20~70

RoHS complaint 	Low standby power consumption<0.5W

The TPG-3W series are miniature, isolated 3W DC/DC converters in a SIP package.They offer the ideal solution in many space critical applications for board level power distribution. The Internal SMD construction makes it possible to offer a product with high performance at low cost, The series offers smaller size, improved efficiency, lower output ripple noise and 3KVDC isolation.

RoHS compliantCE certification	Efficiency from 81% to 88%	Operating temperature :-40 to 105

UL 94V-0 package material	Industry standard pinout	3KVDC isolation

Input voltage: 3.3V, 5V, 12V, 15V, 24V,48V	Output voltage: 3.3V, 5V, 9V, 12V, 15V,24V	Internal SMD construction

Part Number	Nominal Input Voltage	Output Voltage	  Output Current(Max./Min)

V	V	mA

TPG0305S-3W	3.3	5	600/60

TPG0503S-3W	5	3.3 	909/90.9

TPG0505S-3W	5	5	600/60

Brand:	TOPPOWER

size:	37*18.5*16.5mm power:	3w   type:	ac-dc Price:	5.00$/Pieces

Min.Order:	100 Pieces       SupplyAmount:	5000 Pieces

Delivery:	Shipment within 8 days since the date of payment        Address:	China

The rated output power of TP03AA series is 3W with wide input voltage range, for both AC input and DC input application.
High reliability, precision, large power density, ultra-small size, no external heat sink required,
stable output voltage and etc, with over current protection, EMI filter circuit, the rectifier filter circuit,
3000V isolation voltage, short circuit, overload, internal thermal protection, Widely used in telecommunications,
industrial control, instrument, data acquisition, signal control and other electronic systems.

20W 1.5KVDC Wide Voltage Input DC/DC Converters
The rated output power of TP20DB converters is 20W,the outline dimensions is "25.4*25.4*12.7",
4:1 wide input voltage range,the voltage range is 9V-36V,18-75V .The accuracy of the converter can
reach ±1%,it can be widely used in telecommunications,railway transportation, instrument and etc.
20W output power Long-term short-circuit protection, Auto recovery High switching frequency , High output density
Metal shell package With remote control and output adjustment function RoHS compliant
SELECTION GUIDE
Part Number
Input Voltage Output Efficiency(Typ)%Ripple and noisemV
Voltage VDC)VoltageVDC) CurrentARated Range values

The TPV series are miniature, isolated 1W DC/DC converters in a SIP and DIP package. They offer the ideal solution in many space critical applications for board level power distribution. The Internal SMD construction makes it possible to offer a product with high performance at low cost. The series offers smaller size, improved efficiency and 4KVDC isolation.

Part Number	Nominal Input Voltage	Output Voltage

V	V

TPV0303DA	3.3	3.3

TPV0305DA	3.3	5

TPV0503DA	 5	3.3

TPV0505DA	5	5

TPV0509DA	5	9

TPV0512DA	5	12