mili lee | 3-8W DIP 24pins 1.5KVDC isolated DC/DC converters
2:1 or 4:1 input with 3.3,5,9,12,15VDC output
case size: 31.75*20.32*11.2mm
TP06DA24S05 is the replacement of Ten5-2411
TP04DA24S07 = Am4t-2407sz
TP05DA24S05 =Scw05b-05
TP05DA12S05 =Scw05a-05
we,TOPPOWER main products:
0.1W-400W DC-DC converters,3W-30W AC-DC converters,(SIP/DIP/SMD)
TOPPOWER quality : ISO9001:2015, IATF16949:2016
welcome inquiry. |
| TP78XX-2 series switching regulators are ideal replacement for TP78xx linear regulators and LDOs. The efficiency of up to 92% means that very little energy is wasted as heat so there is no need for any heat sinks with their additional space and mounting costs. They are widely used in industrial control, instrumentation, and electric power applications.
ROHS Compliant Wide input non-isolatedregulated single output Efficiency up to 93% Short circuit protection, Thermal shutdown Temperature range: -40C ~ +85C Low ripple noise SIP package No heat sink required Industry standard pinout Part Number Input Voltage (VDC) Output Efficiency% Nominal Range VoltageVDC) CurrentmA) Vin (Min) Vin(Max) TP781.5-2 12 4.75~18 1.5 2000 79 76 TP781.8-2 12 4.75~18 1.8 20 00 81 79 TP782.5-2 12 4.75~18 2.5 2000 85 83 TP783.3-2 12 4.75~18 3.3 2000 87 86 TP785.0-2 12 7-18 5.0 2000 91 88 TP786.5-2 12 8.5-18 6.5 2000 92 91 |
| The rated output power of TPC/GZM-60-T05D15 is 60Winput voltage range176-264VAC, output voltage : 5/±15VDC ,High reliability&effificency ,long-life , with short circuit, overload protection, Widely used in instrument, telecommunications, industrial control, data acquisition, signal control , New Energy, Security,and other electronic systems.
AC input 176VAC-264VAC overload,over-voltage,short circuit protection Operating temperature0~50
RoHS complaint High reliability,effificency No fans Triple output 160*99*38mm
SELECTION GUIDE
Part Number Input Output Efficiency @25, Typ% Ripple
(mV p-p), |
| The rated output power of TPC/PD-15-XS series is 15Winput voltage range90-264VAC,
output voltage : 3.3V,5V,12V,15V ,24V. High reliability, precision,effificency , ultra-small size,
with short circuit, over-load,over-voltage protection,Widely used in telecommunications,
industrial control, instrument,data acquisition,signal control , New Energy,
Security,and other electronic systems.
AC input 90VAC-264VAC 100% full load burn-in test short circuit, overload,over-voltage protection
Operating temperature-20~70
RoHS complaint Low standby power consumption<0.5W
|
| The rated output power of TP50AW converters is 50W with wide input voltage range,
for both AC input and DC input application. High reliability, precision, large power density,
ultra-small size, stable output voltage and etc, with 1500V isolation voltage, short circuit, overload,
internal thermal protection, Widely used in telecommunications, industrial control, instrument, data acquisition,
signal control and other electronic systems.
Part Number Input Voltage Output Efficiency (Typ. )% Capacitive ability(uF) Rated Range values VoltageVDC) CurrentAVAC)
TP50AW220S05 220(2:1) 165-265 5 10 78 10000 T P50AW 220S12 220(2:1) 165-265 12 4 81 1000 TP50AW 220S15 220(2:1) 165-265 15 3.3 83 1000 |
| 1W Isolated Regulated Single Output DC/DC Converters
The TPF series are miniature, isolated 1W DC/DC converters in a SIP and DIP package. They offer the ideal solution in many space critical applications for board level power distribution. The internal SMD construction makes it possible to offer a product with high performance at low cost. The series offers smaller size, improved efficiency, lower output ripple noise and 3KVDC isolation.
Part NumberNominal Input VoltageOutput Voltage
VV
TPF0505D55
TPF0509D59
TPF0512D512
TPF0515D515
TPF0505S55
TPF0509S59 |
| The rated output power of TP15DC converters is 15W,the outline dimensions is "50.8*25.4*12.2", 2:1 input voltage range,the voltage range is 9V-18V,18V-36V,36V-72V.The accuracy of the converter can reach ±1%,it can be widely used in telecommunications,railway transportation, instrument and etc.
15W output power 2:1 input voltage range Under input voltage protection
50.8mm*25.4mm*12. 2mm standard package
Fixed switching frequency Over output voltage protection Operating temperature: -40to 85 Long-term short circuit protection Metal shielding package RoHS compliant / /
SELECTION GUIDE
Part Number Input Voltage Output Efficiency(Typ)
|
| 1W SIP7 unregulated 3KVDC isolated DC/DC converters
5VDC input with 5VDC output
case size:19.5*6*10mm
TPR0505S-1W is the replacement of TMA0505S/IV0505SA/B0505LS-1W
TPR1224S-1W=B1224LS-1W
if any inquiry about PCB mountable converters ,welcome check with us.
We could replace: MurataPS, Recom, TRACO,Aimtec
CUI ,Minmax,Meanwell,XP power,etc,. |
| The rated output power of TPC/LR-150-XS series is 150Winput voltage range90-264VAC,
output voltage : 12V,15V,24V,36V,48V,High reliability, precision,effificency , ultra-small size, no external heat sink required, stable output voltage and etc, with short circuit, over-load,over-voltage protection, Widely used in telecommunications, industrial control, instrument, data acquisition, signal control , New Energy, Security,and other electronic systems.
Universal AC input 90VAC-264VAC 100% full load burn-in test short circuit, over-load,over-voltage protection
Operating temperature-30~70
RoHS complaint Low standby power consumption<0.5W
All using 105 long-life electrolytic capacitors
High reliability,effificency Full compliance with safety regulation,EMC design
|
| The rated output power of TP12DC converters is 12W,the outline dimensions is "50.8*25.4*12.2", 2:1 and 4:1 wide input voltage range,
the voltage range is 9V-18V,18V-36V,36V-72V,9V-36V and 18V-72VDC.
The accuracy of the converter can reach ±1%,it can be widely used in telecommunications, railway transportation, instrument and etc.
Part Number Input Voltage Output voltageVDC) VoltageVDC) Rated Range values TP12DC12S03 12(2:1) 9-18 3.3 TP12DC12S05 12(2:1) 9-18 5 TP12 DC12S12 12(2:1) 9-18 12 TP12DC12S15 12(2:1) 9-18 15 |
| The rated output power of TPC/NE-50-XS series is 40-53.76Winput voltage range90~264Vac,
output voltage : 5V,12V,24V,48V,High reliability, precision,effificency , with short circuit, over-voltage,over-load protection, Widely used in telecommunications, industrial control, instrument, data acquisition, signal control , New Energy, Security,and other electronic systems.
AC input selectable by switch 90~264 VAC 100% full load burn-in test short circuit ,over-voltage, over-load protection
Operating temperature-25~70
RoHS complaint High reliability,effificency
All using 105 long-life electrolytic capacitors
/ /
SELECTION GUIDE
Part Number Input Output Efficiency
|
| DESCRIPTION
The rated output power of TP10AC series is 10W,With very low no-load consumption (only 60mW),
Low leakage current(only 0.1mA ),ultra-small size,50.8*25.4*15.3mm,
isolated voltage up to 4KVAC. Product safe and reliable,Good EMC performance,
EMC And meet the safety specifications of IEC/EN61000-4,CISPR22/EN55022,UL60950/EN60950/EN60601,etc.
Widely used in medical, industrial, office and civil industries,
if applied to the bad electromagnetic compatibility must refer to the application circuit
Part Number Input Output Efficiency(typ.)%
VoltageVAC) Voltage VDC) CurrentA VAC VDC |
| Basic Information:
The TPE-2W series are miniature, isolated 2W DC/DC converters in a SIP package.
They offer the ideal solution in many space critical applications for board level power distribution.
The internal SMD construction makes it possible to offer a product with high performance at low cost.
The series offers smaller size, improved efficiency, lower output ripple noise.
1 Isolated Single OutputUL 94V-0 package materialWide operating temperature range
Miniature design make it possible for many space critical applications for board level power distribution. |
| 3W 1.5KVDC3KVDC Isolated Wide Range Input Voltage DC/DC Converters
The rated output power of TP03DA converters is 3W,the outline dimensions is "31.75*20.32*10.65", 2:1 and 4:1 wide input voltage range, the voltage range is 4.9V-9V,9V-18V,18V-36V,36V-72V,9V-36V and 18V-72VDC.The accuracy of the converter can reach ±1% ,It can be widely used in telecommunications, railway transportation, instrument and etc.
3W output power
2:1 and 4:1 wide input voltage range Over load protection
31.75mm*20.32mm*10.65mm standard package |
| The rated output power of TPC/LR-35-XS series is 35-38.4Winput voltage range90-264VAC,
output voltage : 5V,12V,15V,24V,36V,48V,High reliability, precision,effificency , ultra-small size,
no external heat sink required, stable output voltage and etc, with short circuit, overload protection,
Widely used in telecommunications, industrial control, instrumentmation, data acquisition, signal control , New Energy, Security,and other electronic systems.
AC input 90VAC-264VAC 100% full load burn-in test short circuit, overload,over-voltage protection
Operating temperature-30~70
RoHS complaint Low standby power consumption<0.5W
|
| Universal input voltage range Both for AC and DC input voltage Low Ripple &Noise High efficiency, high power density, miniature dimensions Low power consumption50mW Overheat protection ,Over current protection International standard Footprint&Pinouts Industrial product design Operating temperature : -40 to 70
SELECTION GUIDE
Part Number Input Voltage Output Efficiency (Typ. ) % Ripple &Noise mVp-p
( Typ.)
Voltage VAC) VoltagVDC) CurrentA Rated Range values |
| TPET0509
output power : 1W
packing type: SMD
pins: 8
Dc/DC converter modules
input volatge: VDC= 5Vin
output volatge: VDC= 9Vout
TOPPOWER can produce:
0.1W-400W DC-DC converters,1W-30W AC-DC converters,(SIP/DIP/SMD)
TOPPOWER quality : ISO9001:2015, IATF16949:2016
isolated voltage: 1.5KVDC ,2KVDC,3KVDC,4KVDC,6KVDC,10KVDC,3KVAC,4KVAC.
WE accept OEM orders. |
| 3W, 5W 3KVAC Isolation Wide Input AC/DC Converters
TP03(05)AD series is 3W ,5W with wide input voltage range, for both AC input and DC input application, come with Low power consumption <0.05W , low Leakage current @0.1mA ,miniature size:35*25.4*18mm ,and good EMC performance, can meet the EMC and safety specifications: IEC / EN61000-4 CISPR32 / EN55032,
UL62368, EN62368, IEC62368 and other related standards. This series of power supplies have important applications in many fields such as LED, street light control, industry, office and civil industries ,etc.***please refer to the application circuit when the parts is applied in the environment with severe electromagnetic compatibility.
Part Number Input Output Efficiency (Typ. )% Voltage VAC Voltage VDC VoltageVDC) CurrentA TP03AD220S03W 85-305 120-430 3.3 0.70 66 TP03AD220S05 W 85-305 120-430 5 0.60 76 TP03AD220S09W 85-305 120-430 9 0.33 78 TP03AD220S12 W 85-305 120-430 12 0.25 79 TP03AD220S15W 85-305 120-430 15 0.20 80 |
| The rated output power of TP25AU~TP30AU converters is 25~30W with wide input voltage range, for both AC input and DC input application. High reliability, precision, large power density, ultra-small size, no external heat sink required, stable output voltage and etc, with over current protection, EMI filter circuit, the rectifier filter circuit, 3000V isolation voltage, short circuit, overload, internal thermal protection, Widely used in telecommunications, industrial control, instrument, data acquisition, signal control and other electronic systems.
Part Number Input Voltage Output Rated Range values VoltageVDC) Current
A
VAC) TP25AU220S03W 220(4:1) 85-265 3.3 5.0 TP25AU220S05W 220(4:1) 85-265 5 5.0 TP25AU220S12W 220(4:1) 85-265 12 2.08 TP25AU220S15W 220(4:1) 85-265 15 1.67 pre> |
| The TKE-W25 series are miniature, isolated 0.5W DC/DC converters in a SIP and DIP package. They offer the ideal solution in many space critical applications for board level power distribution. The internal SMD construction makes it possible to offer a product with high performance at low cost. The series offers smaller size, improved efficiency.
Part Number Nominal Input Voltage Output Voltage V V TKE0303D-W25 3.3 3.3 TKE0305D-W25 3.3 5 TKE0 309D-W25 3.3 9 TKE0303S-W25 3.3 3.3 TKE0305S-W25 3.3 5 TKE0309S-W25 3.3 9 |
|
|