Search Results

1. www.ti.com › lit › dsADC080x 8-Bit, µP-Compatible, Analog-to-Digital Converters ...

   www.ti.com › lit › ds

   The key to decoding circuitry is the DM74LS373, 8-bit D type flip-flop. When the Z-80 acknowledges the interrupt, the program is vectored to a data input Z-80 subroutine. This subroutine will read a peripheral status word from the DM74LS373 which contains the logic state of the INTR outputs of all the converters.

   • File Size: 6MB

   • Page Count: 58

2. media.digikey.com › pdf › Data SheetsADC08031/ADC08032/ADC08034/ADC08038 8-BitHigh-SpeedSerial I/O ...

   media.digikey.com › pdf › Data Sheets

   SNAS062C –JUNE 1999–REVISED APRIL 2013. ADC08031/ADC08032/ADC08034/ADC08038 8-Bit High-Speed Serial I/O A/D Converters with Multiplexer Options, Voltage Reference, and Track/Hold Function. Check for Samples: ADC08031, ADC08032, ADC08034, ADC08038.

3. octopart.com › adc08034bin-national+semiconductorNational Semiconductor ADC08034BIN - Octopart

   octopart.com › adc08034bin-national+semiconductor

   • Cached

   ADC08034BIN National Semiconductor - Integrated Circuits (ICs) - Distributors, Price Comparison, and Datasheets | Octopart component search. The Pulse. API. BOM Tool. Sign In. Electronic Parts. Integrated Circuits (ICs) Discrete Semiconductors. Passive Components. Electromechanical. Connectors. Test Equipment. Tools and Supplies. Sensors.

4. media.digikey.com › pdf › Data SheetsADC08031/ADC08032/ADC08034/ADC08038 8-Bit High-Speed Serial I ...

   media.digikey.com › pdf › Data Sheets

   ADC08034BIN, ADC08034CIN, ADC08038BIN, ADC08038CIN, ADC08031BIWM, ADC08032BIWM, ADC08034BIWM, ADC08038BIWM ADC08031CIWM, ADC08032CIWM, ADC08034CIWM, ADC08038CIWM Supply Voltage (VCC) 4.5 V DCto 6.3 V Electrical Characteristics The following specifications apply for VCC =VREF =+5VDC, and fCLK = 1 MHz unless otherwise specified. Boldface limits

5. www.chipfind.net › static › pdfADC08031/ADC08032/ADC08034/ADC08038 8-Bit

   www.chipfind.net › static › pdf

   ADC08034BIN, ADC08034CIN, ADC08038BIN, ADC08038CIN, ADC08031BIWM, ADC08032BIWM, ADC08034BIWM, ADC08038BIWM ADC08031CIWM, ADC08032CIWM, ADC08034CIWM, ADC08038CIWM Supply Voltage (VCC) 4.5 VDC to 6.3 VDC Electrical Characteristics The following specifications apply for VCC e VREF ea5VDC, and fCLK e 1 MHz unless otherwise specified. Boldface limits

6. www.alldatasheet.com › datasheet-pdf › pdfADC08034 Datasheet(PDF) - National Semiconductor (TI)

   www.alldatasheet.com › datasheet-pdf › pdf

   • Cached

   8-Bit High-Speed Serial I/O A/D Converters with Multiplexer Options, <BR> Voltage Reference, and Track/Hold Function, ADC08034 Datasheet, ADC08034 circuit, ADC08034 data sheet : NSC, alldatasheet, Datasheet, Datasheet search site for Electronic Components and Semiconductors, integrated circuits, diodes, triacs and other semiconductors.

7. People also ask

   What is a adc0801 series?

   • The ADC0801 series are versatile 8-Bit μP compatible general purpose ADC converters operate on single 5-V supply. These devices are treated as a memory location or I/O port to a micro-processor system without additional interface logic. The outputs are Tri-state latched which facilitate interfacing to micro-processor control bus.

   ADC080x 8-Bit, µP-Compatible, Analog-to-Digital Converters datasheet

   www.ti.com/lit/ds/symlink/adc0804-n.pdf

   See all results for this question

   What is the ADC0804 digital output code?

   • In all versions of the ADC0804 except the ADC0804LCJ, each resistor is typically 2.2 kΩ. For VIN(−)≥ VIN(+) the digital output code will be 0000 0000. Two on-chip diodes are tied to each analog input (see block diagram) which will forward conduct for analog input voltages one diode drop below ground or one diode drop greater than the VCC supply.

   ADC080x 8-Bit, µP-Compatible, Analog-to-Digital Converters datasheet

   www.ti.com/lit/ds/symlink/adc0804-n.pdf

   See all results for this question

   What is Com Mode on adc08038?

   • The common input line (COM) on the ADC08038 can be used as a pseudo-differential input. In this mode the voltage on this pin is treated as the “−”input for any of the other input channels. This voltage does not have to be analog ground; it can be any reference potential which is common to all of the inputs.

   ADC08031/ADC08032/ADC08034/ADC08038 8-BitHigh-SpeedSerial I/…

   media.digikey.com/pdf/Data Sheets/Texas Instruments PDFs/ADC08031,2,4,8.pdf

   See all results for this question

   Does adc08031 require addressing?

   • Because the ADC08031 contains only one differential input channel with a fixed polarity assignment, it does not require addressing. The common input line (COM) on the ADC08038 can be used as a pseudo-differential input. In this mode the voltage on this pin is treated as the “−”input for any of the other input channels.

   ADC08031/ADC08032/ADC08034/ADC08038 8-BitHigh-SpeedSerial I/…

   media.digikey.com/pdf/Data Sheets/Texas Instruments PDFs/ADC08031,2,4,8.pdf

   See all results for this question