Search Results
With the choice of 4 different 10 I/O CPU units we fulfill all needed functionality to do all kind of control automation. Three of them (C1/C2/C4) are expandable up-to 34 I/O. The C3 has fixed 10 I/O. All DC models have analogue input and a high-speed counter input up to 150Hz.
- 6, 100 to 240 VAC
- 6, 1 to 24 VDC
- RS-485
- Trademarks
- Preface
- Intended Audience
- Exclusive Warranty
- Limitations
- Limitation on Liability; Etc
- Suitability of Use
- Programmable Products
- Performance Data
- Change in Specifications
- Errors and Omissions
- OMRON Product References
- Precautions for Safe Use
- Precautions for Correct Use
- Precautions for Safe Use
- Definition of Precautionary Information
- Precautions
- Precautions for Safe Use
- Circuit Design
- Maintenance
- Installation Environment
- Handling
- Countermeasure Examples
- Easy Operation with an Inexpensive Controller
- Features and System Configuration
- Front
- Right Side
- Right Side
- Right Side
- Meaning
- Color
- Meaning
- Screen Transitions
- Menu Selection Example
- Program/ Edit.
- Parameters
- I/O, Work, and Internal Holding Bits
- Display Bits
- Protection by Cover
- Installation Method
- Mounting Direction
- External Wiring
- ■ Power Supply
- Precautions for Correct Use
- Precautions for Correct Use
- Precautions for Correct Use
- (1) Output Short Circuit Protection
- (2) Inductive Loads
- (3) Inrush Current Considerations
- Countermeasure 1
- Operation to Select German
- Select DELETE PROG.
- Writing Ladder Programs
- Select EDIT PROG.
- ■ Timers, Counters, and Analog Comparators
- Timers, Holding Timers, Counters, and Display Output Configurations
- Drawing Connection Lines
- 3-4 Confirming Ladder Program Operation
- Precautions for Safe Use
- Operation Checks
- Method for Checking Operation
- Inserting Lines
- Deleting Blank Lines
- All Timers Except Twin Timers
- Counters (C)
- 8-Digit Counter (F)
- 3-8 Using Weekly Timers (@)
- Normal Operation (N)
- Pulse Operation (P)
- Normal Operation (N)
- Parameter Monitor Screen Display
- 3-11 Comparing Timer/Counter Present Values Using Comparators (P)
- 3-13 Displaying Messages (Display Bits (D))
- 4-1 Protecting Programs
- 4-2 Stabilizing Input Operations
- 4-4 Setting Daylight Saving Time (DST)
- 4-5 Reading System Information
- 5-2 Using Memory Cassettes
- Precautions for Correct Use
- Mounting Memory Cassettes to LED-type CPU Units
- 6-1 Troubleshooting
- 6-2 Error Messages
- Error During Program Transfer from Memory Cassette
- 6-3 Deleting Error Messages
- AC Inputs (Not Isolated)
- DC Inputs I4 and I5 (Ia and Ib for Units with 20 I/O points) (Not Isolated)
- AC Inputs (Not Isolated)
- DC Inputs (ZEN-8E1DR Not Isolated)
- DC Inputs (ZEN-8E1DT: Photocoupler Isolated)
- Cycle Time Calculation Method
- Operating Mode at Startup
- Application
- Application
- Application
- Program Example
- Application
- Timer and Holding Timer Settings
- Weekly Timer Settings
- Revision History
• Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
OMRON products are manufactured for use according to proper procedures by a qualified operator and only for the purposes described in this manual. The ZEN is a compact and highly functional controller that can be used to easily automate small-scale applications. Its development has drawn on OMRON's advanced control technology and expertise in manuf...
This manual is intended for the following readers. • Persons in charge of introducing FA devices Persons who design FA systems Persons who install or connect FA devices Persons who manage working FA installations Persons who use this product must have sufficient knowledge of electrical systems (i.e., an electrical engineer or the equivalent). Terms...
Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type...
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPE-CIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAM-AGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CON-TRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual ...
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combi-nation of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limi-tations of use which apply to the Product...
Omron Companies shall not be responsible for the user’s pro-gramming of a programmable Product, or any consequence thereof.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determin-ing suitability and does not constitute a warranty. It may repre-sent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual perfor-mance is subject to the Omron’s Warranty ...
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Prod-uct may be changed without any notice. When in doubt, spe-cia...
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsi-bility is assumed for clerical, typographical or proofreading errors or omissions.
All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to an OMRON product, regardless of whether or not it appears in the proper name of the product.
Indicates precautionary information that should be heeded in using the ZEN.
Indicates precautionary information that should be heeded to ensure correct use of the ZEN.
Indicates precautionary information that should be heeded to ensure safe use of the ZEN. RUN PARAMETER SET CLOCK LANGUAGE ▲ ▼ Indicates that the display (the word “LANGUAGE” in this case) is flashing. In this manual, this state is described by saying that the “flashing cursor” is at the word “LANGUAGE”. In this state it is possible to change settin...
The following notation is used in this manual to provide precautions required to ensure safe usage of the product. The safety precautions that are provided are extremely important to safety. Always read and heed the information provided in all safety precautions. The following notation is used. WARNING Indicates a potentially hazardous situation wh...
WARNING Serious human hazard may occasionally occur due to ignition or rupture of the lithium battery used in the Battery Unit. Do not short the battery terminals or charge, disassemble, deform under pressure, or incinerate the battery. Never use any battery that has been dropped on the floor or otherwise subjected to excessive shock.
Please observe the following precautions for safe use of this products.
All interface connectors and battery connector are live parts, they may not be directly connected to Softy Extra Low Voltage (SELV) circuit or to accessible conductive parts. For the programming units and Personal Computers use only the ZEN-CIF01 Connecting Cable (optional accessory) manufactured by OMRON. ZEN-CIF01 provides safe (reinforced) insul...
When replacing a CPU Unit, transfer to the new Unit and confirm all settings for clock data, internal holding bits, holding timers, and counters before starting operation again.
Do not install the ZEN in the following locations. Locations subject to radical changes in temperature Location with high humidity subject to condensation Locations subject to excessive dust or dirt Locations subject to corrosive gas Locations subject to direct sunlight Do not install the ZEN in locations subject to shock or vibration. Extended use...
Connect connectors only after confirming that the direction or polarity is correct. Failures could result if dust or dirt enters the ZEN. Always connect the connector cover to the computer connector whenever it is not being used. Do not remove the label from the left side of the CPU Unit if a Battery Unit is not mounted.
When switching an inductive load, connect an surge protector, diodes, etc., in parallel with the load or contact as shown below.
Ladder programming is possible directly from CPU Unit. When using LED-type CPU Units (without LCD display) with Memory Cassettes (optional), ladder programs can be easily copied.
The ZEN is small but has a wide range of functions and is easy to use. The ZEN facilitates small-scale automatic control.
Power supply terminals Input terminals LCD Operation buttons Output terminals Battery Unit connector (Remove the seal to connect the Battery Unit.) ZEN ZEN Support Support Software Software connector connector (also (also used used for for Memory Memory Cassette.) Cassette.)
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
- 3MB
- 198
Mar 31, 2024 · Order today, ships today. ZEN-10C1AR-A-V2 – Programmable Logic Controller (PLC) Chassis Mount, DIN Rail 100 ~ 240VAC from Omron Automation and Safety. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
- $285.82
- CONTROL LOG 6 IN 4 OUT 100-240V
- Omron Automation and Safety
- Z2678-ND
ZEN-V2 Series Programmable Relay Operation Manual: Manual ZEN Programmable Relay Operation Manual: Z183-E1-01A [5434KB] Mar 29, 2013. 20130329. 0010 030_Manual: ZEN ...
Type All Clear Manual Instruction ManualManual NameCatalog Number [size]Last UpdateManualZEN-V2 Series Programmable Relay ...Z211-E1-05 [3439KB]Mar 09, 2020 20200309ManualZ183-E1-01A [5434KB]Mar 29, 2013 20130329ManualZEN-10C3AR-A-V2/10C3DR-D-V2 Programmable ...Z234-E1-01 [5489KB]Mar 29, 2013 20130329ManualZEN-SOFT01-V4 Support Software Operation ...Z184-E1-05 [2332KB]Mar 09, 2020 20200309Omron ZEN-10C1AR-A-V2 Manuals. Manuals and User Guides for Omron ZEN-10C1AR-A-V2. We have 1 Omron ZEN-10C1AR-A-V2 manual available for free PDF download: Datasheet.
Three of them (C1/C2/C4) are expandable up-to 34 I/O. The C3 has fixed 10 I/O. All DC models have analogue input and a high-speed counter input up to 150Hz. The C4 model is equipped with communication. DC input/supply units have analogue input + high speed counter. The ZEN-10C4 has RS-485 communication. Expansion available with relay output or ...
Apr 21, 2024 · ZEN. Size: 90 mm x 70 mm x 56 mm. Analog / Digital: Analog. Brand: Omron Automation and Safety. Features: Memory back-up using EEPROM or battery.
People also ask
What is the operation manual for a Zen programmable relay?
What's new in Zen 2?
What is a Zen controller?
What's new in Omron Zen 2?
