Search Results
Common causes of the P2441 include a failed secondary air pump control valve, a clogged or severed vacuum hose, and a failed secondary air pump. Symptoms of the P2441 code include an illuminated check engine light, noise coming from the air injection system, and the vehicle getting stuck in limp mode. Contentshide.
- What The P2441 Code Means
- What Causes The P2441 Code?
- What Are The Symptoms of The P2441 Code?
- How Does A Mechanic Diagnose The P2441 Code?
- Common Mistakes When Diagnosing The P2441 Code?
- How Serious Is The P2441 Code?
- What Repairs Can Fix The P2441 Code?
- Additional Comments For Consideration Regarding The P2441 Code
- Need Help with A P2441 Code?
- GeneratedCaptionsTabForHeroSec
P2441 is an OBD-II code for the engine control module (ECM) detecting no exhaust pulse while monitoring the exhaust pressure sensor when the bank 1 switching valve is commanded to be open with the engine running. This will signal a fault in the system.
The engine control module (ECM) monitors the exhaust pressure sensors to determine if the air injection system for bank 1 is operating correctly when it commands the switching valve open and closed.The code is set when the air injection system switching valve for bank 1 is commanded open and the sensor is detecting no exhaust pulse indicating the valve is stuck closed or the pressure sensor i...The Check Engine Light will be illuminated and the code P2441 will be set in ECM memory.The vehicle will not run any different in most cases, but you may have an exhaust leak at the switching valve.The vehicle will fail emission testing and exhaust fumes may get into the cab.Scans for codes and documents the code in the ECM, and then looks at the freeze frame data for the problem.Clears the codes and retest to verify the code returns and two drive cyclesTests the resistance of the bank one switching valve and check as per pinpoint testTests wiring for shorts between power supply and the pressure sensorClearing ECM memory codes before checking the freeze frame data for the main failure problem, so the failure may be duplicated and repairedFailing to clear the ECM codes after the codes are fixedFailing to verify the failure before attempting testing and repairsNot repairing any exhaust leaks that may cause the code to be presentCode P2441 is an indication that the air injection system switching valve is not working or a sensor problem that will cause no drive symptoms. The exhaust emissions will be affected and will cause the vehicle to fail emission testing. There may also be exhaust leaks that would cause the code to be present.
Replacing the exhaust pressure sensor to the secondary air injection system for bank oneRepairing wiring or connections to the air injection system as directed by pinpoint testsRepairing any exhaust manifold or pipe leaks in the systemCode P2441 is for the secondary air injection switching valve being stuck closed for bank one of the engine with the exhaust possibly melting the valve causing it to stick closed. Make sure you correct any engine lean condition or exhaust leaks in the manifold that could cause the exhaust to become hotter than normal.
YourMechanic offers certified mobile mechanics who will come to your home or office to diagnose and repair your vehicle. Get a quote and book an appointment onlineor speak to a service advisor at 1-800-701-6230.
P2441 is a code for the air injection system switching valve being stuck closed for bank 1 of the engine. Learn how to diagnose and fix this code with YourMechanic's certified mobile mechanics.
- (8.6K)
May 24, 2017 · P2441 is a generic code that indicates a problem with the switching valve that allows ambient air to enter the exhaust manifold after a cold start. Learn the common causes, symptoms and troubleshooting steps for this code.
Aug 15, 2013 · I coded w a friends program laptop, a P2441 code fault. Secondary air injection system switching valve, stuck closed position. How do I clear this or repair? I cleared the code w the computer but it came back. This is on a 2008 Tundra. Thx for any suggestions provided.
May 28, 2019 · Tacoma P2441 indicates the computer has detected that a secondary air injection switching valve is stuck closed for bank 1. There’s a pressure sensor in the valve that’s trying to detect the pulsation of exhaust gas when the valve is switched on by the ECM and the engine is running.
Aug 9, 2023 · Learn what causes the P2441 Toyota code and how to fix it. The code indicates a fault in the secondary air injection system that regulates the catalyst activation when warming up the engine.
People also ask
What does P2441 code mean?
What does the Toyota P2441 code mean?
What are the symptoms of code P2441?
What does p2421 mean?
P2441 is a fault code that indicates a problem with the secondary air injection system switching valve stuck closed. Learn how to diagnose and repair this issue, which can affect engine performance and emissions.
