Search Results
The following sample generates CS8147: // CS8147.cs (6,44) public class C { private ref int number; ref int Number { get => ref number; init => number = value; } } To correct this error. Removing any set accessor for a property that returns by reference will correct this error:
The CS8147 is a 10 V/5.0 V dual out- put linear regulator. The 10 V +/- 5.0 V% output sources 500mA and the 5.0 V +/-3% output sources 70mA. The secondary output is inherently stable and does not require an external capacitor. The on board ENABLEbar function controls the regulator's two outputs.
The CS8147 is packaged in a 5 lead TO–220 with copper tab. The copper tab can be connected to a heat sink if necessary. Features •Two Regulated Outputs – 10 V ±5.0%; 500 mA – 5.0 V ±3.0%; 70 mA •70 µA SLEEP Mode Current •Inherently Stable Secondary Output (No Output Capacitor Required) •Fault Protection – Overvoltage Shutdown
Features. • Two Regulated Outputs. – 10 V ±5.0%; 500 mA. – 5.0 V ±3.0%; 70 mA. • 70 µA SLEEP Mode Current. • Inherently Stable Secondary Output (No Output Capacitor Required) • Fault Protection. – Overvoltage Shutdown. – Reverse Battery. – 60 V Peak Transient. – –50 V Reverse Transient. – Short Circuit. – Thermal Shutdown.
The CS8147 is packaged in a 5 lead TO–220 with copper tab. The copper tab can be connected to a heat sink if necessary. Features • Two Regulated Outputs – 10 V ±5.0%; 500 mA – 5.0 V ±3.0%; 70 mA • 70 µA SLEEP Mode Current • Inherently Stable Secondary Output (No Output Capacitor Required) • Fault Protection – Overvoltage Shutdown
Nov 18, 2022 · Reason for the Error & Solution. Properties which return by reference cannot have set accessors. Example. The following sample generates CS8147: // CS8147.cs (6,44) public class C. { private ref int number; ref int Number { get => ref number; init => number = value; } } To correct this error.
onsemi. Integrated Circuits (ICs) | Voltage Regulators - Linear, Low Drop Out (LDO) Regulators. CS8147 onsemi Power Management (PMIC) parts available at DigiKey.