Search Results

1. www.analog.com › en › productsAD7980 Datasheet and Product Info | Analog Devices

   www.analog.com › en › products

   • Cached

   Jan 29, 2021 · Features. High performance. Pseudo differential analog input range. 0 V to V REF with V REF between 2.5 V to 5 V. Throughput: 1 MSPS. Zero latency architecture. 16-bit resolution with no missing codes. INL: ±0.6 LSB typical, ±1.25 LSB maximum. Dynamic range: 92 dB, V REF = 5 V. SNR: 91.5 dB at f IN = 10 kHz, V REF = 5 V.

2. www.digikey.com › AD7980ACPZ-RL7 › 1756704AD7980ACPZ-RL7 Analog Devices Inc. | Integrated Circuits (ICs ...

   www.digikey.com › AD7980ACPZ-RL7 › 1756704

   • Cached

   1,500. Order today, ships today. AD7980ACPZ-RL7 – 16 Bit Analog to Digital Converter 1 Input 1 SAR 10-LFCSP-WD (3x3) from Analog Devices Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.

   • Brand: Analog Devices Inc.

3. People also ask

   What settling level should a ad7980 amplifier settle?

   • For multichannel multiplexed applications, the driver amplifier and the AD7980 analog input circuit must settle for a full-scale step onto the capacitor array at a 16-bit level (0.0015%, 15 ppm). In the amplifier data sheet, settling at 0.1% to 0.01% is more commonly specified.

   16-Bit, 1 MSPS, PulSAR ADC in MSOP/LFCSP Data Sheet AD7980 - Anal…

   www.analog.com/media/en/technical-documentation/data-sheets/AD7980.pdf

   See all results for this question

   What happens when a ad7980 converts a high impedance to low?

   • When the conversion is complete, SDO goes from high impedance to low. With a pull-up on the SDO line, this transition can be used as an interrupt signal to initiate the data readback controlled by the digital host. The AD7980 then enters the acquisition phase and powers down.

   16-Bit, 1 MSPS, PulSAR ADC in MSOP/LFCSP Data Sheet AD7980 - Anal…

   www.analog.com/media/en/technical-documentation/data-sheets/AD7980.pdf

   See all results for this question

   How do I decouple ad7980 voltage reference input ref?

   • The AD7980 voltage reference input REF has a dynamic input impedance and should be decoupled with minimal parasitic inductances. This is done by placing the reference decoupling ceramic capacitor close to, ideally right up against, the REF and GND pins and connecting them with wide, low impedance traces.

   16-Bit, 1 MSPS, PulSAR ADC in MSOP/LFCSP Data Sheet AD7980 - Anal…

   www.analog.com/media/en/technical-documentation/data-sheets/AD7980.pdf

   See all results for this question

   What is the difference between rising edge & falling edge ad7980?

   • Each ADC in the chain outputs its data MSB first, and 16 × N + 1 clocks are required to readback the N ADCs. Although the rising edge can be used to capture the data, a digital host using the SCK falling edge allows a faster reading rate and, consequently, more AD7980 devices in the chain, provided the digital host has an acceptable hold time.

   16-Bit, 1 MSPS, PulSAR ADC in MSOP/LFCSP Data Sheet AD7980 - Anal…

   www.analog.com/media/en/technical-documentation/data-sheets/AD7980.pdf

   See all results for this question

4. www.mouser.com › ProductDetail › Analog-DevicesAD7980ACPZ-RL7 Analog Devices | Mouser

   www.mouser.com › ProductDetail › Analog-Devices

   • Cached

   AD7980ACPZ-RL7 Analog Devices Analog to Digital Converters - ADC 16-Bit, 1 MSPS, PulSAR ADC in MSOP/LFCSP datasheet, inventory, & pricing.

   • Brand: Analog Devices

5. www.analog.com › media › en16-Bit, 1 MSPS, PulSAR ADC in MSOP/LFCSP Data Sheet AD7980

   www.analog.com › media › en

   FEATURES . High performance . Pseudo differential analog input range . 0 V to V. REF. with V. REF. between 2.5 V to 5 V . Throughput: 1 MSPS . Zero latency architecture . 16-bit resolution with no missing codes . INL: ±0.6 LSB typical, ±1.25 LSB maximum . Dynamic range: 92 dB, V. REF. = 5 V . SNR: 91.5 dB at f. IN. = 10 kHz, V. REF. = 5 V .

   • File Size: 562KB

   • Page Count: 27

6. Images

   • 
   • 
   • 
   • 

   View all

7. www.analog.com › media › en16-Bit, 1 MSPS PulSAR ADC in MSOP Enhanced Product AD7980-EP

   www.analog.com › media › en

   FEATURES. 16-bit resolution with no missing codes Throughput: 1 MSPS Low power dissipation. 4 mW at 1 MSPS (VDD only) 7 mW at 1 MSPS (total) 70 μW at 10 kSPS INL: ±0.6 LSB typical, ±1.5 LSB maximum. SINAD: 91 dB @ 10 kHz. THD: −114 dB @ 10 kHz Pseudo differential analog input range.

   • File Size: 332KB

   • Page Count: 12

8. my.mouser.com › ProductDetail › Analog-DevicesAD7980ACPZ-RL7 Analog Devices | Mouser Malaysia

   my.mouser.com › ProductDetail › Analog-Devices

   • Cached

   AD7980ACPZ-RL7 Analog Devices Analog to Digital Converters - ADC 16-BIT 1MSPS LOWER POWER ADC IC datasheet, inventory & pricing.

9. Videos

   • 

     1:04

     youtube.com

     2022 Lenovo Legion 7 AMD Advantage™ Edition: Precision. Speed. Supercharged.

     Aug 12, 2022

     10K Views

   • 

     0:46

     youtube.com

     Unleash Performance and Power Scalability with AMD Ryzen™ Embedded 7000 Processors

     Nov 13, 2023

     7.6K Views

   • 

     0:51

     youtube.com

     Introducing the Limited-Edition Starfield AMD Radeon RX 7900 XTX and Ryzen 7 7800X3D

     Aug 10, 2023

     242K Views

   View all

10. datasheets.globalspec.com › ds › analog-devicesAD7980ACPZ-RL7 - Analog Devices, Inc. - 16-Bit, 1 MSPS ...

    datasheets.globalspec.com › ds › analog-devices

    • Cached

    AD7980ACPZ-RL7 -- 16-BIT, 1 MSPS, PULSAR ADC IN MSOP/LFCSP Analog Devices, Inc. 16-Bit, 1 MSPS, PulSAR ADC in MSOP/LFCSP AD7980ACPZ-RL7 Rochester Electronics