Search Results
Description. STMicroelectronics. M50FLW040A. 857Kb / 52P. 4 Mbit (5 x 64KByte Blocks 3 x 16 x 4KByte Sectors) 3V Supply Firmware Hub / Low Pin Count Flash Memory. M50FLW080A. 534Kb / 64P. 8 Mbit (13 x 64KByte Blocks 3 x 16 x 4KByte Sectors), 3V Supply Firmware Hub / Low Pin Count Flash Memory. Toshiba Semiconductor.
4 Mbit (5 x 64KByte Blocks + 3 x 16 x 4KByte Sectors) 3V Supply Firmware Hub / Low Pin Count Flash Memory, M50FLW040A Datasheet, M50FLW040A circuit, M50FLW040A data sheet : STMICROELECTRONICS, alldatasheet, Datasheet, Datasheet search site for Electronic Components and Semiconductors, integrated circuits, diodes, triacs and other semiconductors.
M50FLW040A M50FLW040B 4 Mbit (5 x 64KByte Blocks + 3 x 16 x 4KByte Sectors) 3V Supply Firmware Hub / Low Pin Count Flash Memory FEATURES SUMMARY FLASH MEMORY – Compatible with either the LPC interface or the FWH interface (Intel Spec rev1.1) used in PC BIOS applications – 5 Signal Communication Interface supporting Read and Write Operations
M50FLW040A 4Mb Dual Interface Firmware Hub And LPC For PC Bios 4 Mbit x 64KByte Blocks x 4KByte Sectors) 3V Supply Firmware Hub / Low Pin Count Flash Memory. FLASH MEMORY Compatible with either the LPC interface or the FWH interface (Intel Spec rev1.1) used in PC BIOS applications 5 Signal Communication
M50FLW040A datasheet, M50FLW040A pdf, M50FLW040A data sheet, datasheet, data sheet, pdf, ST Microelectronics, 4 Mbit (5 x 64KByte Blocks + 3 x 16 x 4KByte Sectors) 3V Supply Firmware Hub / Low Pin Count Flash Memory
M50FLW040A, M50FLW040B6/52SUMMARY DESCRIPTIONThe M50FLW040 is a 4 Mbit (512Kb x8) non-vola-tile memory that can be read, erased and repro-grammed. These operations can be performedusing a single low voltage (3.0 to 3.6V) supply. Forfast programming and fast erasing in productionlines, an optional 12V power supply can be usedto reduce the erasing and programming time. Datasheet search
M50FLW040A, M50FLW040BMaximum rating39/648Maximum ratingStressing the device above the rating listed in the Absolute Maximum Ratings table maycause permanent damage to the device. These are stress ratings only and operation of thedevice at these or any other conditions above those indicated in the Operating sections ofthis specification is not implied. Exposure to Absolute Maximum Rating ...
