Search Results

  1. www.hamamatsu.com › si-photodiodes › S2281Si photodiode S2281 | Hamamatsu Photonics

    The S2281 is a Si photodiode sealed in a metal package with a BNC connector. This configuration allows easy connection to Hamamatsu C9329-01 photosensor amplifier. The large photosensitive area makes the S2281 well suited for optical power meters. Hamamatsu also provides E2573 BNC-BNC coaxial cable (length: 1 m) as an option.

  2. www.hamamatsu.com › content › damSelection guide / Si photodiodes - Hamamatsu

    S2281*1 *2 190 to 1100 0.12 0.5 500 1300 ϕ11.3 With BNC connector S2281-04*1 *2 ϕ7.98 *1: Refer to “Precautions against UV light exposure (P.44).” *2: Weak photocurrent can be amplified with low noise by connecting to the photosensor amplifier C9329-01 (using BNC-BNC coaxial cable E2573). Spectral response KSPDB0421EB [ S1337-21 ] S1337 ...

  3. www.gophotonics.com › hamamatsu › 56-1154-s2281S2281 - Hamamatsu Photonics | Photodiode

    The S2281 from Hamamatsu Photonics is a Photodiode with Wavelength Range 190 to 1100 nm, Capacitance 1300 pF, Dark Current 50 to 500 pA, Responsivity/Photosensitivity 0.1 to 0.5 A/W, Rise Time 3 µs. More details for S2281 can be seen below.

  4. www.alldatasheet.com › 212335 › HAMAMATSUS2281 Datasheet(PDF) - Hamamatsu Corporation

    S2281 Product details. C2719 is a current-to-voltage conversion amplifier used to amplify weak photocurrent from a photodiode with very low noise. Three ranges of photocurrent detection sensitivity level (H, M, L) are selectable to match the input signal.

    • S2281 Click to view
    • 2 Pages
    • 110.02 Kbytes
    • S2281

  5. Videos

    View all

  6. www.beamqus.com › product › hamamatsu-siliconHamamatsu Silicon Photodiode with BNC connector S2281

    Hamamatsu Silicon Photodiode with BNC connector S2281. The S2281-01 is a Si photodiode sealed in a metal package with a BNC connector. This configuration allows easy connection to Hamamatsu C9329 photosensor amplifier (S2281-01 has a large terminal capacitance which may cause a gain peaking to occur when C9329 is used with the gain set to the ...

  7. pdf.directindustry.com › pdf › hamamatsuSi photodiodes S2281 series - HAMAMATSU - PDF Catalogs ...

    Si photodiodes with BNC connector The S2281 series is Si photodiodes sealed in a metal package with a BNC connector. This configuration allows easy connection to Hamamatsu C9329 photosensor amplifier (The S2281-01 has a large terminal capacitance which may cause a gain peaking to occur when the C9329 is used with the gain set to the “M ...

  1. Searches related to S2281

    s2281-1s2281-04
    s2281-1 switch replacements2281-1 switch
  2. People also search for