Search Results
M24C04-RDS6TG Product details Description These I²C-compatible electrically erasable programmable memory (EEPROM) devices are organized as 2048/1024/512/256/128 x 8 (M24C16, M24C08, M24C04, M24C02 and M24C01).
Description. The M24C04 is a 4-Kbit I 2 C-compatible EEPROM (Electrically Erasable PROgrammable Memory) organized as 512 × 8 bits. The M24C04-W can be accessed with a supply voltage from 2.5 V to 5.5 V, the M24C04-R can be accessed with a supply voltage from 1.8 V to 5.5 V, and the M24C04-F can be accessed with a supply voltage from 1.6 V to 5 ...
The M24C04 is a 4-Kbit I. 2. C-compatible EEPROM (electrically erasable programmable memory) organized as 512 × 8 bits. The M24C04-W can be accessed with a supply voltage from 2.5 V to 5.5 V, the M24C04-R can be accessed with a supply voltage from 1.8 V to 5.5 V, and the M24C04-F can be accessed either with a supply voltage from 1.7
- 722KB
- 40
Using the E0, E1 and E2 inputs, up to eight M24C02 (or M24C01), four M24C04, two M24C08 or one M24C16 devices can be connected to one I2C bus. In each case, and in the hybrid cases, this gives a total memory capacity of 16 Kbits, 2 KBytes (except where M24C01 devices are used). The 8th bit is the Read/Write bit (RW).
M24C02-RDS6TG is Obsolete and no longer manufactured. M24C02-RDS6TG. Order today, ships today. M24C02-RDS6TG – EEPROM Memory IC 2Kbit I2C 400 kHz 900 ns 8-MSOP from STMicroelectronics. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
- IC EEPROM 2KBIT I2C 400KHZ 8MSOP
- STMicroelectronics
- M24C02-RDS6TG-ND-Tape & Reel (TR)
- M24C02-RDS6TG
Find the best pricing for STMicroelectronics M24C04RDS6TG by comparing bulk discounts from 2 distributors. Octopart is the world's source for M24C04RDS6TG availability, pricing, and technical specs and other electronic parts.
5/29M24C16, M24C08, M24C04, M24C02, M24C01SIGNAL DESCRIPTIONSerial Clock (SCL). This input signal is used tostrobe all data in and out of the device. In applica-tions where this signal is used by slave devices tosynchronize the bus to a slower clock, the busmaster must have an open drain output, and apull-up resistor can be connected from SerialClock (SCL) to VCC. (Figure 4. indicates how the ...
