Search Results
The 74AHC125; 74AHCT125 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (n OE ). A HIGH on n OE causes the outputs to assume a high impedance OFF-state. Inputs are overvoltage tolerant. This feature allows the use of these devices as translators in mixed voltage environments. Download datasheet.
74AHC125D −40 °C to +125 °C SO14 plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 74AHCT125D 74AHC125PW −40 °C to +125 °C TSSOP14 plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 74AHCT125PW 74AHC125BQ −40 °C to +125 °C DHVQFN14 plastic dual in-line compatible thermal enhanced very
- 93KB
- 15
62,500. $0.11691. $7,306.88. Manufacturers Standard Package. Order today, ships today. 74AHC125D,118 – Buffer, Non-Inverting 4 Element 1 Bit per Element 3-State Output 14-SO from Nexperia USA Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
The SNx4AHC125 devices are quadruple bus buffer gates featuring independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable ( OE) input is high. When OE is low, the respective gate passes the data from the A input to its Y output. To ensure the high-impedance state during power up or power down, OE ...
- 1MB
- 39
74AHC125D 74AHCT125D-40 °C to +125 °C SO14 plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 74AHC125PW 74AHCT125PW-40 °C to +125 °C TSSOP14 plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 74AHC125BQ 74AHCT125BQ-40 °C to +125 °C DHVQFN14 plastic dual in-line compatible thermal
Order today, ships today. 74AHC125D,112 – Buffer, Non-Inverting 4 Element 1 Bit per Element 3-State Output 14-SO from Nexperia USA Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
Description. The 74AHC125 provides provides four independent buffer gates with. 3-state outputs. Each buffer has a separate enable pin that when. driven with a high logic level places the corresponding output in the. high impedance state. The device is designed for operation with a. power supply range of 2.0V to 5.5V.
