Search Results
Turn power on and initiate a normal startup. Observe the pilot flame signal on the test meter. If the average flame is below normal, a steady DC voltage reading of 4.0 to 6.0 volts (for UV amplifiers) and 14 to 18 volts (for flame rectifica-tion amplifiers), re-adjust the pilot flame or realign the flame detector.
- 744KB
- 32
The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features & Benefits: 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles): 0.01%. Excellent clamping capability. Low incremental surge resistance.
1.5SMC Series Pb e3 - Littelfuse ... Terminal)))))
- 961KB
- 6
50/60 Hz M-Series II Chassis (120V) Fireye modular M-Series II Flame safeguard controls are compact, modular burner management systems. They provide automatic ignition and continuous flame monitoring for commercial-sized heating and process burners using gas and/or light oil fuels. Flame sensing is accomplished by miniature UV scanners or Flame ...
- $698.8
- 50/60
- Fireye
- Chassis
The Fireye MC120 120 VAC, 50/60 Hz Chassis. MII Series MC120 Flame Safeguard. The MII is a flame safeguard product designed to be backward compatible with the obsolete M Series TFM, UVM controls. Modular M-Series II Flame Safeguard Controls are compact, modular burner management systems.
- Fireye
1.5SMC Series Vishay General Semiconductor Document Number: 88303 Revision: 08-May-07 www.vishay.com 113 Notes: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2
Search field: Component part name: Manufacturer ...
