R192P OC-192/STM-64 Lightwave Receiver

with Improved Sensitivity (18 dBm)

Preliminary Data Sheet, Rev. 5

February 2003

TriQuint Optoelectronics

Featuring improved sensitivity for optimum performance in
noisy, amplified systems, the R192P Receiver is manufactured
in a compact, 16-pin surface-mount package (above), and is
also available with a convenient mounting bracket (below).

Features

High data rate capability, 10.7 Gb/s

PIN photodetector

Fully operational through the 1.3

ľm to 1.6 ľm wave-

length range

Improved typical sensitivity of 18 dBm

Single-mode fiber pigtail with ST, SC, LC, or
FC/PC optical connectors

Operating case temperature range:
0 °C to 70 °C

differential data output, with offset control

Package options:

-- Space-sensitive package without mounting

bracket (ideal for transponder and transceiver
applications)

-- With mounting bracket

Applications

Line terminal equipment

High-speed networks up to 10.7 Gb/s

SONET/SDH OC-192/STM-64 telecommunications
applications

Extended-reach datacom and telecom applications

riQ

uin

riQ

uin

SEM

ICO

NDU

CTO

Rec

eiv

er M

odu

R19

R192P OC-192/STM-64 Lightwave Receiver

Preliminary Data Sheet, Rev. 5

with Improved Sensitivity (18 dBm)

February 2003

2
2

For additional information and latest specifications, see our website: www.triquint.com

Description

Receiver Operation

The R192P 10.7 Gb/s fiber-optic receiver consists of a
high-speed PIN photodetector and a wide-band linear
preamp in a pigtailed, surface-mount metal package. It
is designed for use in single-mode, high-speed tele-
communication applications at the SONET OC-192
and the ITU-T SDH STM-64 data rate of
9.95328 Gb/s.

At 10.7 Gb/s, the typical room temperature sensitivity
measured at a BER of 1 x 10

is 18 dBm. The oper-

ating case temperature range for the receiver is 0 °C to
70 °C.

The receiver is manufactured in a compact, 16-pin sur-
face-mount package with a single-mode optical fiber
pigtail. The fiber pigtail is internally beveled for low
return loss and is available with ST, SC, LC, or FC-PC
optical connectors.

The dc levels of the differential outputs can be adjusted
relative to each other for optimum sensitivity in noisy,
amplified systems. These outputs are centered around
a dc level of typically 0.45 V. The TIA requires only a
5 V power supply for operation. The PIN photodiode
requires a nominal bias voltage of 5 V to 10 V at less
than 1 mA.

Pin Information

Electrostatic Discharge

CAUTION: This device is susceptible to damage as

a result of electrostatic discharge. Take
proper precautions during both handling
and testing. Follow guidelines such as
EIA

Standard EIA-625.

TriQuint Semiconductor employs a human-body model

(HBM) for ESD-susceptibility testing and protection-de-

sign evaluation. ESD voltage thresholds are dependent

on the critical parameters used to define the model. A

standard HBM (resistance = 1.5 k

, capacitance =

100 pF) is widely used and can be used for comparison

purposes.

Table 1. Pin Descriptions

Pin Number

Name

PIN Bias

GND

DATAN

DATA

GND

OFF

+OFF

Feedback Input Threshold Control

GND

Thermistor

For additional information and latest specifications, see our website: www.triquint.com

Preliminary Data Sheet, Rev. 5

R192P OC-192/STM-64 Lightwave Receiver

February 2003

with Improved Sensitivity (18 dBm)

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operations section of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.

* Device is normally reverse biased. Forward biasing the photodiode can compromise device performance and reliability.

Optical Characteristics

Parameter

Symbol

Min

Max

Unit

Supply Voltages:

Negative Supply

4.7

5.7

Photodiode Supply Current:
Forward*
Reverse

--
--

mA
mA

Optical Input Power

MAX

dBm

Operating Case Temperature

°C

Storage Temperature

°C

Lead Soldering Temperature

250

°C

Lead Soldering Time

Table 2. Optical Characteristics (T

= 25 °C)

Parameter

Symbol

Min

Typ

Max

Unit

Optical Wavelength

1.250

1.615

ľm

Sensitivity (10.7 Gb/s, 2

1 PRBS, 1 x 10

BER,

1310 nm <

< 1550 nm)

LOW

dBm

Maximum Optical Input Power (10.7 Gb/s, 2

1 PRBS,

1 x 10

BER), V

= 5 V

HIGH

dBm

Optical Return Loss

Responsivity of PIN,

= 1.55 ľm R

0.7

0.8

A/W

Total Dark Current

0.3

For additional information and latest specifications, see our website: www.triquint.com

R192P OC-192/STM-64 Lightwave Receiver

Preliminary Data Sheet, Rev. 5

with Improved Sensitivity (18 dBm)

February 2003

Electrical Characteristics

Table 3. Electrical Characteristics (T

= 25 °C)

Parameter

Symbol

Min

Typ

Max

Unit

dc Power Supply Voltages:

Negative Supply

PIN Bias

4.94

5.2

5.46

V
V

dc Power Supply Currents:

Negative Supply

PIN Bias

--
--

110

mA
mA

Power Dissipation

DISS

0.6

Transimpedance:

500 ľA

Note: The output voltage increases linearly up to

750

ľAp-p of input current and is operational

up to 2.2 mAp-p of input current.
Conditions: single-ended, 50

load, low fre-

quency.

550

700

900

Average Equivalent Input Noise Spectral Density

(Bandwidth 100 KHz to 15 GHz)

pA/

Summed Equivalent Noise Power

1400

rms

Low Frequency Cutoff

kHz

Bandwidth

8.5

GHz

Rolloff (F

to F

5 GHz)

Peaking

Group Delay:
0.2 GHz--5 GHz
0.2 GHz--8 GHz

--
--

ą15
ą20

--
--

ps
ps

Output Return Loss:
0 GHz--6 GHz
0 GHz--8 GHz

--
--

>10

--
--

dB
dB

Transimpedance, T

PH AVG

(

)

--------------------

, where I

PH AVG

(

)

= the average photodiode current.

For additional information and latest specifications, see our website: www.triquint.com

Preliminary Data Sheet, Rev. 5

R192P OC-192/STM-64 Lightwave Receiver

February 2003

with Improved Sensitivity (18 dBm)

Outline Diagrams

Outline Drawing, Package Style A

Dimensions are in inches and (millimeters).

0.375

(9.53)

0.611

(15.51)

0.037

(0.95)

0.050

(1.27)

1.017

(25.83)

1.174

(29.82)

DETAIL "B"

4 x 0.087(2.20)

0.333

(8.45)

0.050

(1.27)

0.608

(15.45)

0.797

(20.25)

0.097

(2.46)

0.260

(6.60)

0.500

(12.70)

0.150

(3.80)

0.043

(1.10)

0.042

(1.10)

SECTION AA

0.150

(3.80)

0.272

(6.90)

2.010 REF.

(51.05)

DETAIL B

0.016

(0.40)

0.008

(0.20)

0.025

(0.64)

0.125

(3.18)

0.079

(2.00)

1-1237(F)

For additional information and latest specifications, see our website: www.triquint.com

R192P OC-192/STM-64 Lightwave Receiver

Preliminary Data Sheet, Rev. 5

with Improved Sensitivity (18 dBm)

February 2003

Outline Diagrams

(continued)

Outline Drawing, Package Style N

Dimensions are in inches and (millimeters).

0.170

(4.32)

0.050

(1.27)

0.175

(4.44)

0.500

(12.70)

0.260

(6.60)

0.500

(12.70)

0.150

(3.80)

0.043

(1.10)

0.042

(1.10)

SECTION A-A

0.146

(3.70)

0.272

(6.90)

0.060

(1.52)

0.156

(3.95)

0.606

(15.38)

0.087

(2.22)

0.020

(0.51)

0.050

(1.27)

0.569

(14.45)

1.135

(28.84)

0.354

(9.00)

0.611

(15.51)

0.004

(0.100)

0.037

(0.95)

0.354

(9.00)

0.611

(15.51)

0.157

(4.00)

0.276

(7.00)

2 x 0.008

(0.20)

2 x 0.016

(0.40)

0.013

(0.32)

0.025

(0.64)

0.063

(1.59)

0.125

(3.18)

0.315

(8.00)

1-1236(F)

Additional Information

For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint:

Web: www.triquint.com

Tel: (503) 615-9000

E-mail: info_opto@tqs.com

Fax: (503) 615-8902

For technical questions and additional information on specific applications:

E-mail: info_opto@tqs.com

The information provided herein is believed to be reliable; TriQuint assumes no liability for inaccuracies or omissions. TriQuint assumes no responsibility for the use of this information, and all
such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are
implied or granted to any third party.
TriQuint does not authorize or warranty any TriQuint product for use in life-support devices and/or systems.

DS01-064-5 Revision 1.1, February, 2003

R192P OC-192/STM-64 Lightwave Receiver

Preliminary Data Sheet, Rev. 5

with Improved Sensitivity (18 dBm)

February 2003

Ordering Information

Table 4. Ordering Information

Description

Product Code

Package Style

Connector

Comcode

R192P-Type OC-192/STM-64
Lightwave Receiver

R192PDAA A

108668815

R192PGAA

108668849

R192PSAA

108989435

R192PDAN

108940412

R192PGAN

700020049

R192PSAN

108989443

EIA is a registered trademark of the Electronic Industries Association.

1. For additional ordering information, please contact a TriQuint account manager.

Part Number R192P

Document Outline