©2000 Elantec Semiconductor, Inc.
EL
6200C -
Produ
c
t
B
r
ief
North America: 1-888-352-6832 X 311
Asia: +85-45-682-5820
Europe: +44-18-977-6020
Complete Product Specifications
Elantec Technical Support:
Features
·
Small 5-pin SOT-23 package
·
Frequency to 450 MHz typ.
·
Amplitude to 100mA pk/pk typ.
·
Single +3.5V to +5.0V supply
·
Simple to use - only two external
resistors required
·
Independent resistor setting for
frequency and amplitude.
Applications
·
DVD- Players
·
Optical disk drives
·
DVD-ROM drives
·
DVD-RAM drives
·
CD-RW drives
·
MO drives
·
Optical pickup head assembly
·
Laser diode modulation
·
Local oscillator
·
Communications lasers
Ordering Information
Part No
Temp. Range
Package
Outline #
EL6200CW
0°C to +70°C
5-Pin SOT23
MDP0038
EL6200C - Product Brief
450 MHz HFM Oscillator
Jan
uary 31, 2000
General Description
The EL6200C is a solid state high performance laser modulation oscil-
lator with external resistor adjustable frequency and amplitude. The
EL6200C is available in the 5-pin SOT23 to enable device placement
close to the laser for reduced EMI signature.
The oscillator frequency is set by connecting a single external resistor
from the RFREQ pin to ground. The oscillator current output ampli-
tude is set by connecting a single external resistor from the RAMP pin
to ground.
The EL6200C has internal supply bypass capacitors to reduce oscilla-
tion noise spread through supply connections.
Connection Diagram
5-Pin SOT23
1
2
3
4
5
V
S
GND
R
AMP
R
FREQ
I
OUT
2
EL6200C - Product Brief
450 MHz HFM Oscillator
EL620
0C
- Produ
c
t
General Disclaimer
Specifications contained in this product brief are in effect as of the publication date shown. Elantec Semiconductor, Inc. reserves the right to make
changes in the circuitry or specifications contained herein at any time without notice. Elantec Semiconductor, Inc. assumes no responsibility for
the use of any circuits described herein and makes no representations that they are free from patent infringement.
WARNING - Life Support Policy
Elantec Semiconductor, Inc. products are not authorized for and
should not be used within Life Support Systems without the specific
written consent of Elantec Semiconductor, Inc. Life Support sys-
tems are equipment intended to support or sustain life and whose
failure to perform when properly used in accordance with instruc-
tions provided can be reasonably expected to result in significant
personal injury or death. Users contemplating application of Elantec
Semiconductor, Inc. Products in Life Support Systems are requested
to contact Elantec Semiconductor, Inc. factory headquarters to
establish suitable terms & conditions for these applications. Elantec
Semiconductor, Inc.'s warranty is limited to replacement of defec-
tive components and does not cover injury to persons or property or
other consequential damages.
Elantec Semiconductor, Inc.
675 Trade Zone Blvd.
Milpitas, CA 95035
Telephone: (408) 945-1323
(888) 352-6832 (toll free)
Fax:
(408) 945-9305
European Office: 44-18-977-6020
Jan
uary 31, 2000
Printed in U.S.A.
Japan Office:
85-45-682-5820
PDF 
ZIP